LIFT / Project Gallery
2 Jib & 1 Bridge Crane
2019 - Kristian’s main obstacle designing the bridge for SRI was their specification that the entire crane structure, including the runways, must be completely freestanding and could not be tied back to the building’s structure in any way. Freestanding bridge and workstation cranes are not unusual in any sense, but with a span of 45’ and a runway length of 77’, this was no small freestanding crane.CLICK IMAGE LINK FOR FULL ARTICLE
15, 20 & 50 Ton Crane/Runway System
2016-2017 Two new top running, double girder bridge cranes with capacities of 20 and 50 tons. One reconditioned 15 ton top running double girder crane, for a Saskatoon industrial facility.Kristian Electric was also commissioned to construct and install a 230’ runway system in the facility. These runways included twenty support columns around 20’ in height each.
Demag DH 1000 wire rope hoists completed the package.
CLICK IMAGE LINK FOR FULL WRITE UP
10 Ton R&M
2017 - 10 Ton single box girder, top-running R&M bridge crane. Complete with 150' runway system, R&M wire rope hoist and Tele-Radio robust remote control. A turnkey solution for a Calgary based pipeline facility.3 Bridge-1 Jib-12 Workstation Cranes
2015-2016 Installation of 3 overhead bridge cranes at 10, 5 and 1 ton capacity as well as a 1000lbs capacity Gorbel wall cantilever jib crane. The installation of 12 workstation bridge cranes at varying lengths, layouts and bridge counts to meet that area’s particular needs.CLICK IMAGE LINK FOR FULL ARTICLE
6 Overhead Cranes
2005 - Manufacture & install 2 - 5 ton TRSG Demag Cranes as well as install a pre-built 15Ton TRSG Demag.2007 - Manufacture & install a 5 ton TRSG Demag.
2013 - Manufacture & install a 10 ton URDG R&M Crane.
2015 - Un-install original 5 ton (from 2007 install), shorten span and re-install in customers new building.
CLICK IMAGE LINK FOR FULL WRITE UP
Stop Log Lifter Crane
2014 service and modification to a Stop Log Lifter Crane from a southern Alberta Dam.CLICK IMAGE LINK FOR FULL WRITE UP
4 Demag Cranes
2016 installation at a manufacturing plant in the South Foothills Industrial Park of four Demag double girder, top running bridge cranes and three runway systems.CLICK IMAGE LINK FOR FULL WRITE UP
Gorbel Workstation Crane
2013 installation of a Gorbel workstation crane in a city pump station. The crane would be used for maintenance and repairs on the pumps, motors and valves in the lower level of the water lift station.CLICK IMAGE LINK FOR FULL WRITE UP
19 Demag Cranes
Nineteen Demag Top Running Bridge cranes manufactured and installed at a turbine maintenance facility located in Airdrie, Alberta. Both single and double girder crane types were built with capacities ranging from 3, 10, 15 and 20 Tons. Each crane was outfitted with Demag DR wire rope hoists and ran on radio controlled systems.4 Jib Cranes
Four jib cranes, manufactured and installed at a heavy duty equipment production facility in Edmonton. Each jib was custom designed for the specific workstation it would be used for, and equipped with Demag chain hoists with a capacity of either 1 or 2 tons.5 Gorbel Workstation Cranes
Five Gorbel workstation cranes constructed and installed at a production facility for the oil and gas industry in Edmonton, Alberta. Four cranes were outfitted with Kito brand chain hoists while the fifth was equipped with the Gorbel G-Force, an intelligent lifting device.Two 20 Ton Demag Cranes
Two 20 ton double box girder cranes, manufactured and installed in an existing concrete production facility in Calgary. With a span of 43 feet, these cranes have a combined lifting ability of 40 tons.40 Ton Demag
A 40 Ton double box girder overhead crane manufactured and installed in a production facility in Calgary. This facility would be used to produce concrete pipes in a high production environment, and an overhead crane was required to manage the extreme material handling needs. This top running crane spans 78 feet and is equipped with Demag wire rope hoists.Three (2x20) Tonne Cranes
Three identical top running, double box girder overhead cranes for a welding and manufacturing facility in Innisfail. Each crane had a span of 52' and was outfitted with two 20 Ton wire rope hoists with a 50 ft. lift. The entire system runs on a single radio controlled remote.Two 5 Ton Cranes
Two 5 ton single girder top running cranes, runways and columns were manufactured for a artificial lift fabrication facility in Calgary. Due to the proximity of the crane to the buildings ceiling mounted infrared heaters, Kristian Electric custom designed and installed heat shields for each crane. Equipped with Demag DR-BAS wire rope hoists, each crane runs on FM radio remote control systems.Show More
RELATED ITEMS
BLOG ARTICLE
The MacGyver InstallationPRODUCT
JLC HoistsBLOG ARTICLE
Hot Dam!BLOG ARTICLE
A Decade of CranesShow More
