me="facebook-domain-verification" content="jatatfsri72lrbml1eymeipcazcct5" />
 
Induction4 insta.jpg

The ProHeat 35 Air-Cooled Induction Heating System is specifically designed for preheating applications up to 400° Fahrenheit (204°C).

  • Air-cooled blankets are available for pipe diameters from 8-60 inches (20-152 cm) or in the case of plate, the lengths are 41-205 (1-5.2 m).

  • The blankets easily conform to circular and flat parts and install in a matter of seconds.

  • Manufactured from durable high-temperature materials, flexible induction blankets are designed to withstand the tough conditions in both industrial and construction applications.


Improved working environment is created during welding. Welders are not exposed to open flame, explosive gases and hot elements associated with fuel gas heating and resistance heating. 

 

Easy set-up with flexibility to fit a variety of pipe diameters and plate lengths.

On-board temperature control provides for manual or temperature-based programming in a simple-to-learn operator interface.

Uniform heating is maintained along and through the heat zone by using induction to heat within the material. The surface of the part is not marred by localized conducted heat at higher than specified temperatures.

Time-to-temperature is faster than conventional processes due to the method of applying heat, reducing cycle time.

Induction5 insta.jpg

EQUIPMENT & ACCESSORIES

Proheat 35 Power Source
Proheat 35 Power Source
Insulation w/ Cable Harness
Insulation w/ Cable Harness
Air-Cooled Cables
Air-Cooled Cables
Output Extension Cables
Output Extension Cables
Thermocouple Extention
Thermocouple Extention
Air Cooled Blanket
Air Cooled Blanket
Thermocouple Sensor
Thermocouple Sensor
Prehat Cable Cover
Prehat Cable Cover
Replacement Kevlar Sleeve
Replacement Kevlar Sleeve
Series Cable Adapter
Series Cable Adapter
Remote Contactor Control
Remote Contactor Control
Remote Hand Control
Remote Hand Control

QUICK SPECS

Applications Process piping, Refinery, Petrochemical, Power piping, Pressure vessels, Structural, Shipbuilding

Maximum Preheat Temperature 400°F (204°C )

Input Power 460–575 V, 3-phase, 60 Hz 400–460 V, 3-phase, 50/60 Hz

Input Amperes at Rated Output 400 V: 60 amps 460 V: 50 amps 575 V: 40 amps

Rated Output 35 kW at 100% duty cycle

Power Source Dimensions H: 27.5 in. (699 mm) W: 21.75 in. (552 mm) D: 36.75 in. (933 mm)

Power Source Weight Net: 227 lb. (103 kg) Ship: 265 lb. (120 kg)

Air cooled Proheat.jpg