Gorbel Fixed Height
Capacities from 1 ton – 5 ton
Spans from 8ft. – 30ft.
Heights from 10ft. – 20ft.
Movable under load
Easily moved to any location in a facility
Cost effective for areas with infrequent lifts
GORBEL Adjustable Height
•Capacities from 1 ton – 5 ton
•Spans from 8ft. – 30ft.
•HUB heights range from 7 ft. (min.) to 20 ft. (max)
•Adjustable in 6" increments to provide different lifting heights
•Easily moved to any location in a facility
•Cost effective for areas with infrequent lifts
GORBEL Adjustable Height Aluminum
•Capacities from 1000 lbs. – 4000 lbs.
•Standard spans up to 20'.
•Height Under Boom 6-12'
•Adjustable in 6” increments to provide different lifting heights
•Collapsible for easy storage
•Cost effective for areas with infrequent lifts
Spanco T Series
All Steel - up to 10 tons capacity, height up to 24'-3", span up to 40'
Aluminum I-beam - up to 3 tons capacity, height up to 22'-0", span up to 15'
Spanco A Series
Steel with Adjustable Height - up to 10 tons capacity, height up to 16', span up to 40'
Steel with Fixed Height - up to 10 tons capacity, height up to 16', span up to 40'
Aluminum with Adjustable Span and Height - up to 3 tons capacity, height up to 12.2', span up to 20' (on 1-ton models)
Spanco Aluminum
Capacities: up to 3 tons
Adjustable Height Under I-beam: up to 12’-2"
Adjustable Spans: up to 20’ on 1-ton models and 15' on 2- & 3-ton models
Spanco E Series
Fixed Height
- Up to 5 Ton Capacity. 10' height under beam, Span length 12'

Adjustable Height & Span
- Up to 3 ton capacity, up to 14' height under beam, span length 11'6"
Spanco PF Series
Capacities: up to 15 tons
Height under I-beam, standard: up to 35’
Spans, standard: up to 40’
Spans, custom: up to 50’*
Spanco Single Leg
Semi-Gantry Capacities: up to 15 tons
Height under I-beam: up to 35’
Spans: up to 40’
Spanco Wide Flange
•Capacities from 1 ton – 5 ton
•Spans from 8ft. – 30ft.
•Heights from 10ft. – 20ft.
•Easily moved to any location in a facility
•Cost effective for areas with infrequent lifts
Spanco Power Drive Kit
For the PF Series Gantry Cranes allow high volume, high capacity gantry travel along V-tracks, guide angles, or truly trackless paths.
Includes: Two drives with drive wheels and sprockets; chains; two gear reducers; two single-speed, 230/460V, three-phase, TEFC motors; solid state, adjustable “soft start”; and two idler assemblies. Standard travel speed is 50 FPM; custom speeds available
Tripod Crane
Tripod Capacities: 1 or 2 tons
Height (to eyebolt): From 5’-2” to 13’-9”
Tripod Construction: Steel or Aluminum
Show More

RELATED ITEMS

INFOGRAPHIC
Gantry 101
BLOG ARTICLE
Gorbel Gantry Cranes
SERVICE
Preventative Maintenance
PRODUCT
JLC Hoists
Show More
Spanco Single Leg

Semi-Gantry Capacities: up to 15 tons Height under I-beam: up to 35’ Spans: up to 40’

Go to link